Mimaki UJV-160 UV Printer
Mimaki USA, Inc.
Mimaki UJV-160 UV
Summary
Printers wishing to broaden their use of PVC and vinyl media are often afraid of drying times, deformation of media and cracking of inks. The UJV-160 using breakthrough UV LED curing technology eliminates all problems associated with printing on PVC and vinyl so broadening the print service provider's portfolio.Features
- The UJV-160 achieves its high image quality with a resolution of 1200 x 1200 dpi and prints in three variable dot sizes. This enables rich and vivid colors bringing the designers intended images to life.
- The UJV-160 can be equipped with temperature-controlled pre-print heaters. Control of ink dots on film media enables glossy finishing without ink bleed.
- Depending on the thickness of the media the head height can be adjusted (stepless) from 1.5 to 12.5 mm.
- Media with various thickness can be handled with uniformly high printing quality.
- Media holding plates on both sides prevent warping of the media during printing. Thus jamming is avoided and precise, reliable printing is achieved.
- Maintaining high quality with variable dots, print speed of about 7m²(75sq.ft.)/h is realized at a standard print mode (600 x 600 dpi, 4pass)
- As standard, the UJV-160 comes with feed and delivery tables in order to enable printing not only roll-to-roll but also on rigid materials. Thus printing on foam boards and other light weight materials up to a thickness of 10 mm (0.4") is made possible.
- The tables are foldable thereby saving space when not needed.
Specifications
| Head | On-demand Piezo head |
| Print resolution | 600 dpi, 1200 dpi |
| Ink Kind | UV-curable flexible ink (4 color: Y,M,C,K) |
| Ink Capacity | 880 cc (440 cc x 2 cartridge)/color |
| Maximum Print Width | Roll: 1,610 mm (63.3"), Rigid: 1,600 mm (63.0") |
| Media Width | 1,620 mm (63.7") |
| Media Thickness | Max. 10 mm (0.39") |
| Media Weight (Roll) | less than 25 kg (55 lbs.) |
| Media Weight (Rigid) | less than 2 kg (4.4 lbs.) |
| Media Roll diameter | Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1") |
| Media cutting | Cut by hand |
| UV device | Equipped with two UV LED lamps |
| Media heater | Pre/print heater |
| Media take-up device | Roll take-up device (Standard), inside/outside selectable |
| Interface | USB2.0 |
| Applicable standard | VCCI class A, UL60950-1, FCCI class A, CE marking (EMC directive, low voltage directive), CB report, RoHS |
| Power | AC100V~120V, 200~240V±10%, 50·60Hz±1Hz, less than 1.68KVA |
| Operation environments | 15°C~30°C, 35~65%Rh (No condensation) |
| Dimensions (W x D x H) Main unit | 3,300mm x780mm x 1,290mm (129.9" x 19.8" x 50.7") |
| Dimensions (W x D x H) Main unit + media stand | 3,300mm x 4,300mm x 1,290mm (129.9" x 169.3" x 50.7") (with support wire) |
| Weight Main unit | 260 kg (573 lbs.) |
| Weight Media table | 50 kg (110 lbs) x 2 units |
Additional Information
View product datasheetLast Updated: July 12, 2009 (22:07 EDT)
Have additional questions? Send Us E-Mail